Acho que nada dá mais prazer no trabalho que receber um laptop novo. Tem gosto de natal. Em geral esse sentimento de felicidade se dá a cada 3 ou 4 anos, dependendo da política da empresa (e do faturamento, claro).
Ano passado, pela mudança de local e país, eu já tinha recebido um "monstrobook" HP ZBook 15 para trabalhar. Apesar da versão mais nova de hardware, não era muito diferente do meu antigo laptop, também "monstrobook", que descrevi em "rodando Linux no HP EliteBook 8570w" e que pesava por volta de 5 Kg com a fonte de alimentação. Notebook parrudo, mas muito, muito pesado.
No final do ano passado recebi a excelente notícia que todos os notebooks corporativos HP deveriam ser trocados pra Dell pros que usavam Linux, que é meu caso. Felicidade transbordando, vamos às compras.
Entre as opções corporativas, vários notebooks, vários latitudes e inspirions. Notebooks bons, mas sem muita diferença pra o que eu já tinha antes. Então resolvi arriscar e pegar um ultrabook, ainda mais um que tinha a cara do que eu queria: Dell XPS 13 Ubuntu Developer Edition. Eu nunca tinha usado um laptop tão pequeno e principalmente sem drive de CD/DVD. Mas se Linus Torvalds trabalha num MacBookAir, então resolvi arriscar em algo parecido.
Não vou comentar muito da parte burocrática, pois foi algo chato e que não acrescenta muito. Apenas que o laptop demorou uma eternidade pra chegar por ser teclado US e quando chegou, veio com o teclado nórdico. No fim a Dell mandou outro laptop ao invés de trocar o teclado. Excelente serviço pós-venda deles. Ao menos pros clientes corporativos.
E gravei o unboxing do brinquedo novo (aliás, como é difícil abrir e desempacotar tudo com uma só mão):
Do laptop, nada a reclamar. Leve, muito leve. Algo como 1,2 Kg sem a fonte, que também é pequena. Parte externa metálica. E bateria que dura por volta de 6 horas. Isso mesmo. Eu passo quase que o dia inteiro trabalhando sem conectar na energia. Coisa maravilhosa.
A placa de vídeo não é das mais fortes. É uma placa Intel Broadwell-U. Funciona bem com os kernels mais novos (estou rodando o 4.1.2 no momento) mas tem alguns problemas pra usar monitor externo na versão de Ubuntu que vem de fábrica.
Falando no Ubuntu, sim eu tive de remover. Nada contra Ubuntu ou algo assim, mas usamos uma versão corporativa dele na empresa. Então tive de remover o Ubuntu 14.04 que veio instalado pra instalar... Ubuntu 14.04.
O sistema roda redondo, sem problemas de driver ou algo do gênero. Vantagem do árduo esforço da Intel junto ao Linux pra implementar seus drivers. Bluetooth, wifi, controle de volume pelo teclado, tudo, absolutamente tudo sai funcionando de primeira em Linux. Mais precisamente Ubuntu, mas acredito que não será diferente com outras distros.
O único ponto bizarro dele é mesmo a webcam, que fica na parte de baixo da tela. Então eu fico com um certo olhar de superioridade em todas as conferências que faço via skype ou algo do tipo. Eu já sabia desse ponto, mas não diria que é um ponto negativo a ponto de abandonar a aquisação dele.
Outro ponto que é um limitante é a memória RAM. Pra manter o sistema compacto o suficiente pra caber tudo num ultrabook, a memória RAM é soldada diretamente na placa mãe. Com isso, nada de upgrades. Então a máquina veio com 8 GB de RAM e esses mesmos 8 GB vão ficar por aqui até o fim da vida útil dele. Sem problemas agora, mas será que não vou achar pouco daqui 3 ou 4 anos? Bom... só não rodar Java já libera uns 4 GB com certeza.
Outro ponto é que são somente duas portas USB. USB 3.0, mas só 2. Então um HUB USB é essencial pra poder conectar mouse, pendrive e HD externo. Além da interface ethernet quando dá pau no wifi. Tem saída de vídeo display port, portanto um cabinho display port pra hdmi no DealExtreme é realmente algo necessário. E tem um mostrador de nível de bateria, que é muito útil quando se desliga o laptop, mas usa a porta USB pra alimentar o celular. Tem leitor de memória SD que uso de vez em quando e só. E tudo funcionando lindamente em Linux.
Outro problema que tenho de tempos em tempos é bug com a placa de vídeo. Conectar em monitores externos e remover, dá uns crashes bonitos no drive da Intel de vez em quando. Então meu uptime não é muito alto. Mas sobrevivo bem com o disco SSD que faz o boot em alguns segundos.
Dados técnicos (saídas de comandos como lspci, lsusb, etc):
root@dell-xps-13:~# lspci 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09) 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) 00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03) 01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5249 (rev 01) 02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59) root@dell-xps-13:~# lsusb Bus 003 Device 002: ID 8087:8001 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 0c45:670c Microdia Bus 001 Device 003: ID 8087:0a2a Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@dell-xps-13:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.2-helio (root@dell-xps-13) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #4 SMP PREEMPT Tue Jul 14 22:44:34 CEST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.1.2-helio root=/dev/mapper/my_vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c56cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c56cb000-0x00000000dae7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f9000-0x00000000dbafefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0F5KF3, BIOS A03 03/25/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x21e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF800000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 8MB, type WB [ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 7, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 8, base: 3536MB, range: 16MB, type UC [ 0.000000] total RAM covered: 8120M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3536MB, range: 16MB, type UC [ 0.000000] reg 4, base: 3552MB, range: 32MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8680MB, range: 8MB, type UC [ 0.000000] reg 8, base: 8688MB, range: 16MB, type UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xc56cb max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fda50-0x000fda5f] mapped at [ffff8800000fda50] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21e600000-0x21e7fffff] [ 0.000000] [mem 0x21e600000-0x21e7fffff] page 2M [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21e5fffff] [ 0.000000] [mem 0x200000000-0x21e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc56cafff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc55fffff] page 2M [ 0.000000] [mem 0xc5600000-0xc56cafff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3468a000-0x3633cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000EF220 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE8C0B0 0000DC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAE9F758 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE8C218 013539 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F6F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAE9F868 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAE9F8F0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAE9F938 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAE9F9D8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAE9FA18 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAE9FA50 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAE9FEA8 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9FEF0 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA0398 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAEA03E8 000034 (v03 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAEA0420 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEA1100 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEA11A0 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA16C0 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2238 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2400 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEA27A8 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2818 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA32E0 004207 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA74E8 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000DAEABB30 0000D4 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEABC08 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21e7f9000-0x21e7fdfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216400000-ffff88021ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c56cafff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff] [ 0.000000] On node 0 totalpages: 1982055 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12572 pages used for memmap [ 0.000000] DMA32 zone: 804555 pages, LIFO batch:31 [ 0.000000] Normal zone: 18336 pages used for memmap [ 0.000000] Normal zone: 1173504 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low dfl lint[0x47]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res edge lint[0xef]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high dfl lint[0x40]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl res lint[0x77]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc56cb000-0xdae7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae80000-0xdaeacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaead000-0xdb7f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f9000-0xdbafefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88021e400000 s100888 r8192 d30184 u524288 [ 0.000000] pcpu-alloc: s100888 r8192 d30184 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1951062 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.2-helio root=/dev/mapper/my_vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7690656K/7928220K available (8073K kernel code, 1235K rwdata, 3736K rodata, 1404K init, 1292K bss, 237564K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.978 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.95 BogoMIPS (lpj=10375912) [ 0.000024] pid_max: default: 32768 minimum: 301 [ 0.000028] ACPI: Core revision 20150410 [ 0.018986] ACPI: All ACPI Tables successfully acquired [ 0.033775] Security Framework initialized [ 0.033784] AppArmor: AppArmor initialized [ 0.033784] Yama: becoming mindful. [ 0.034239] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035465] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.035982] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.035990] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.036144] Initializing cgroup subsys blkio [ 0.036146] Initializing cgroup subsys memory [ 0.036151] Initializing cgroup subsys devices [ 0.036153] Initializing cgroup subsys freezer [ 0.036154] Initializing cgroup subsys net_cls [ 0.036156] Initializing cgroup subsys perf_event [ 0.036157] Initializing cgroup subsys net_prio [ 0.036159] Initializing cgroup subsys hugetlb [ 0.036177] CPU: Physical Processor ID: 0 [ 0.036178] CPU: Processor Core ID: 0 [ 0.036181] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.036182] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.037056] mce: CPU supports 7 MCE banks [ 0.037065] CPU0: Thermal monitoring enabled (TM1) [ 0.037072] process: using mwait in idle threads [ 0.037074] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.037075] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.037367] Freeing SMP alternatives memory: 28K (ffffffff81e95000 - ffffffff81e9c000) [ 0.037939] ftrace: allocating 30169 entries in 118 pages [ 0.047914] dmar: Host address width 39 [ 0.047916] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.047924] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.047925] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.047929] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.047930] dmar: RMRR base: 0x000000db9e5000 end: 0x000000db9f3fff [ 0.047931] dmar: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.047932] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.047934] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.047934] HPET id 0 under DRHD base 0xfed91000 [ 0.048207] x2apic is disabled because BIOS sets x2apic opt out bit. You can use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.048216] Enabled IRQ remapping in xapic mode [ 0.048217] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.048824] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088535] TSC deadline timer enabled [ 0.088538] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.088556] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.088571] ... version: 3 [ 0.088572] ... bit width: 48 [ 0.088573] ... generic registers: 4 [ 0.088573] ... value mask: 0000ffffffffffff [ 0.088574] ... max period: 0000ffffffffffff [ 0.088575] ... fixed-purpose events: 3 [ 0.088576] ... event mask: 000000070000000f [ 0.128799] x86: Booting SMP configuration: [ 0.128800] .... node #0, CPUs: #1 [ 0.142878] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.148854] #2 #3 [ 0.182951] x86: Booted up 1 node, 4 CPUs [ 0.182954] smpboot: Total of 4 processors activated (20751.82 BogoMIPS) [ 0.186416] devtmpfs: initialized [ 0.188066] evm: security.selinux [ 0.188067] evm: security.SMACK64 [ 0.188068] evm: security.SMACK64EXEC [ 0.188068] evm: security.SMACK64TRANSMUTE [ 0.188069] evm: security.SMACK64MMAP [ 0.188070] evm: security.ima [ 0.188071] evm: security.capability [ 0.188108] PM: Registering ACPI NVS region [mem 0xdaead000-0xdb7f8fff] (9748480 bytes) [ 0.188239] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.188301] pinctrl core: initialized pinctrl subsystem [ 0.188381] RTC time: 10:56:37, date: 07/17/15 [ 0.188468] NET: Registered protocol family 16 [ 0.190265] cpuidle: using governor ladder [ 0.194282] cpuidle: using governor menu [ 0.194329] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.194330] ACPI: bus type PCI registered [ 0.194332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.194386] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.194388] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.194457] PCI: Using configuration type 1 for base access [ 0.194463] dmi type 0xB1 record - unknown flag [ 0.198592] ACPI: Added _OSI(Module Device) [ 0.198594] ACPI: Added _OSI(Processor Device) [ 0.198595] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.198596] ACPI: Added _OSI(Processor Aggregator Device) [ 0.204395] ACPI: Executed 16 blocks of module-level executable AML code [ 0.212255] ACPI: Dynamic OEM Table Load: [ 0.212260] ACPI: SSDT 0xFFFF880214F95000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.213134] ACPI: Dynamic OEM Table Load: [ 0.213138] ACPI: SSDT 0xFFFF880214EF3000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.214039] ACPI: Dynamic OEM Table Load: [ 0.214043] ACPI: SSDT 0xFFFF880214F92A00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.215450] ACPI : EC: EC started [ 0.217927] ACPI: Interpreter enabled [ 0.217933] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 0.217939] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.217950] ACPI: (supports S0 S3 S4 S5) [ 0.217951] ACPI: Using IOAPIC for interrupt routing [ 0.217976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.219324] ACPI: Power Resource [PG00] (on) [ 0.219618] ACPI: Power Resource [PG01] (on) [ 0.219887] ACPI: Power Resource [PG02] (on) [ 0.230372] ACPI: Power Resource [FN00] (off) [ 0.230432] ACPI: Power Resource [FN01] (off) [ 0.230487] ACPI: Power Resource [FN02] (off) [ 0.230541] ACPI: Power Resource [FN03] (off) [ 0.230593] ACPI: Power Resource [FN04] (off) [ 0.231426] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.231430] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.231839] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.231841] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.232179] PCI host bridge to bus 0000:00 [ 0.232181] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.232183] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.232184] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.232185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.232186] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.232192] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.232264] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.232273] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.232278] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.232282] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.232355] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.232362] pci 0000:00:03.0: reg 0x10: [mem 0xf721c000-0xf721ffff 64bit] [ 0.232435] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.232443] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit] [ 0.232530] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.232543] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.232589] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.232628] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.232656] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.232672] pci 0000:00:16.0: reg 0x10: [mem 0xf7226000-0xf722601f 64bit] [ 0.232727] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.232800] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.232813] pci 0000:00:1b.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit] [ 0.232859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.232903] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.232928] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.232977] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.233035] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.233063] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.233111] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.233168] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.233199] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.233214] pci 0000:00:1d.0: reg 0x10: [mem 0xf7223000-0xf72233ff] [ 0.233283] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.233325] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.233354] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.233500] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.233510] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.233516] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.233522] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.233527] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.233533] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.233538] pci 0000:00:1f.2: reg 0x24: [mem 0xf7222000-0xf72227ff] [ 0.233562] pci 0000:00:1f.2: PME# supported from D3hot [ 0.233616] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.233627] pci 0000:00:1f.3: reg 0x10: [mem 0xf7221000-0xf72210ff 64bit] [ 0.233643] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.233714] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.233740] pci 0000:00:1f.6: reg 0x10: [mem 0xf7220000-0xf7220fff 64bit] [ 0.233947] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.233969] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7100fff] [ 0.234091] pci 0000:01:00.0: supports D1 D2 [ 0.234092] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.234118] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.239035] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.239040] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.239138] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.239183] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.239375] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.239416] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.247051] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.247055] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.248819] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.248854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.248956] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.248990] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.249025] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.249061] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.250057] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.250098] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.250178] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.250180] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.250182] vgaarb: loaded [ 0.250183] vgaarb: bridge control possible 0000:00:02.0 [ 0.250346] SCSI subsystem initialized [ 0.250378] libata version 3.00 loaded. [ 0.250394] ACPI: bus type USB registered [ 0.250406] usbcore: registered new interface driver usbfs [ 0.250413] usbcore: registered new interface driver hub [ 0.250425] usbcore: registered new device driver usb [ 0.250526] PCI: Using ACPI for IRQ routing [ 0.251648] PCI: pci_cache_line_size set to 64 bytes [ 0.251712] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.251713] e820: reserve RAM buffer [mem 0xc56cb000-0xc7ffffff] [ 0.251714] e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff] [ 0.251791] NetLabel: Initializing [ 0.251792] NetLabel: domain hash size = 128 [ 0.251793] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.251801] NetLabel: unlabeled traffic allowed by default [ 0.251844] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.251848] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.253879] Switched to clocksource hpet [ 0.258823] AppArmor: AppArmor Filesystem Enabled [ 0.258875] pnp: PnP ACPI init [ 0.259028] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.259030] system 00:00: [io 0xffff] has been reserved [ 0.259031] system 00:00: [io 0xffff] has been reserved [ 0.259033] system 00:00: [io 0xffff] has been reserved [ 0.259034] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.259035] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.259038] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259075] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.259102] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.259104] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.259197] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.259216] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.259318] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.259319] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.259321] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.259322] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.259323] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.259324] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.259326] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.259327] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.259329] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.259330] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.259331] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.259332] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.259334] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259623] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.259624] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.259626] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.259627] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.263282] pnp: PnP ACPI: found 7 devices [ 0.269459] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.269476] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.269480] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.269486] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.269489] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.269495] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.269497] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.269498] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.269499] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window] [ 0.269500] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.269502] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.269524] NET: Registered protocol family 2 [ 0.269655] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.269769] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.269872] TCP: Hash tables configured (established 65536 bind 65536) [ 0.269900] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.269920] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.269959] NET: Registered protocol family 1 [ 0.269970] pci 0000:00:02.0: Video device with shadowed ROM [ 0.290030] PCI: CLS 64 bytes, default 64 [ 0.290073] Trying to unpack rootfs image as initramfs... [ 0.638103] Freeing initrd memory: 29388K (ffff88003468a000 - ffff88003633d000) [ 0.638159] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.638169] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.638171] software IO TLB [mem 0xc16cb000-0xc56cb000] (64MB) mapped at [ffff8800c16cb000-ffff8800c56cafff] [ 0.638212] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.638213] hw unit of domain pp0-core 2^-14 Joules [ 0.638214] hw unit of domain package 2^-14 Joules [ 0.638215] hw unit of domain dram 2^-14 Joules [ 0.638216] hw unit of domain pp1-gpu 2^-14 Joules [ 0.638278] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d [ 0.638283] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d [ 0.638289] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d [ 0.638296] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d [ 0.638330] microcode: Microcode Update Driver: v2.00 <This email address is being protected from spambots. You need JavaScript enabled to view it. >, Peter Oruba [ 0.638348] Scanning for low memory corruption every 60 seconds [ 0.638565] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.638588] Initialise system trusted keyring [ 0.638604] audit: initializing netlink subsys (disabled) [ 0.638614] audit: type=2000 audit(1437130597.620:1): initialized [ 0.638865] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.638866] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.639998] zpool: loaded [ 0.640001] zbud: loaded [ 0.640106] VFS: Disk quotas dquot_6.6.0 [ 0.640129] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.640450] fuse init (API version 7.23) [ 0.640545] Key type big_key registered [ 0.640789] Key type asymmetric registered [ 0.640791] Asymmetric key parser 'x509' registered [ 0.640825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.640851] io scheduler noop registered [ 0.640853] io scheduler deadline registered (default) [ 0.640875] io scheduler cfq registered [ 0.641219] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.641220] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.641223] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.641233] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.641234] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.641237] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.641242] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.641253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.641278] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.641278] vesafb: scrolling: redraw [ 0.641279] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.641295] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k [ 0.784824] Console: switching to colour frame buffer device 240x67 [ 0.927774] fb0: VESA VGA frame buffer device [ 0.927789] intel_idle: MWAIT substates: 0x11142120 [ 0.927790] intel_idle: v0.4 model 0x3D [ 0.927791] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.928938] ACPI: AC Adapter [AC] (off-line) [ 0.929070] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.929687] ACPI: Lid Switch [LID0] [ 0.929723] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.929726] ACPI: Power Button [PBTN] [ 0.929754] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.929756] ACPI: Sleep Button [SBTN] [ 0.929785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.929787] ACPI: Power Button [PWRF] [ 0.931071] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.931074] ACPI: Thermal Zone [THM] (25 C) [ 0.934200] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.934203] ACPI: Thermal Zone [TZ00] (76 C) [ 0.936867] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.936868] ACPI: Thermal Zone [TZ01] (76 C) [ 0.936923] GHES: HEST is not enabled! [ 0.937019] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.940358] Linux agpgart interface v0.103 [ 0.942158] brd: module loaded [ 0.942823] loop: module loaded [ 0.942991] libphy: Fixed MDIO Bus: probed [ 0.942993] tun: Universal TUN/TAP device driver, 1.6 [ 0.942994] tun: (C) 1999-2004 Max Krasnyansky <This email address is being protected from spambots. You need JavaScript enabled to view it. > [ 0.943030] PPP generic driver version 2.4.2 [ 0.943179] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.943183] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.943260] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.943264] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.943328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.943329] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.943330] usb usb1: Product: xHCI Host Controller [ 0.943331] usb usb1: Manufacturer: Linux 4.1.2-helio xhci-hcd [ 0.943332] usb usb1: SerialNumber: 0000:00:14.0 [ 0.943505] hub 1-0:1.0: USB hub found [ 0.943515] hub 1-0:1.0: 11 ports detected [ 0.951551] ACPI: Battery Slot [BAT0] (battery present) [ 0.953982] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.953985] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.954008] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.954009] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.954011] usb usb2: Product: xHCI Host Controller [ 0.954012] usb usb2: Manufacturer: Linux 4.1.2-helio xhci-hcd [ 0.954013] usb usb2: SerialNumber: 0000:00:14.0 [ 0.954106] hub 2-0:1.0: USB hub found [ 0.954112] hub 2-0:1.0: 4 ports detected [ 0.955102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.955106] ehci-pci: EHCI PCI platform driver [ 0.955190] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.955194] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.955202] ehci-pci 0000:00:1d.0: debug port 2 [ 0.959093] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.959103] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7223000 [ 0.970374] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.970421] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.970424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.970425] usb usb3: Product: EHCI Host Controller [ 0.970427] usb usb3: Manufacturer: Linux 4.1.2-helio ehci_hcd [ 0.970428] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.970604] hub 3-0:1.0: USB hub found [ 0.970609] hub 3-0:1.0: 3 ports detected [ 0.970742] ehci-platform: EHCI generic platform driver [ 0.970759] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.970764] ohci-pci: OHCI PCI platform driver [ 0.970775] ohci-platform: OHCI generic platform driver [ 0.970782] uhci_hcd: USB Universal Host Controller Interface driver [ 0.970827] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.972498] i8042: Warning: Keylock active [ 0.974630] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.974663] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.974882] mousedev: PS/2 mouse device common for all mice [ 0.975247] rtc_cmos 00:01: RTC can wake from S4 [ 0.975364] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.975387] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.975400] i2c /dev entries driver [ 0.975441] device-mapper: uevent: version 1.0.3 [ 0.975498] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised:This email address is being protected from spambots. You need JavaScript enabled to view it. [ 0.975511] Intel P-state driver initializing. [ 0.975603] ledtrig-cpu: registered to indicate activity on CPUs [ 0.975716] Error parsing PCC subspaces from PCCT [ 0.976402] NET: Registered protocol family 10 [ 0.976525] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.976575] NET: Registered protocol family 17 [ 0.976587] Key type dns_resolver registered [ 0.976816] Loading compiled-in X.509 certificates [ 0.977412] Loaded X.509 cert 'Build time autogenerated kernel key: 40a1ff3538b1948f66d6d736bd09d5345f239cd5' [ 0.977424] registered taskstats version 1 [ 0.978759] Key type trusted registered [ 0.981383] Key type encrypted registered [ 0.981390] AppArmor: AppArmor sha1 policy hashing enabled [ 0.981395] ima: No TPM chip found, activating TPM-bypass! [ 0.981420] evm: HMAC attrs: 0x1 [ 0.981729] Magic number: 7:234:932 [ 0.981834] rtc_cmos 00:01: setting system clock to 2015-07-17 10:56:38 UTC (1437130598) [ 0.981886] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.981887] EDD information not available. [ 0.981952] PM: Hibernation image not present or could not be loaded. [ 0.982239] Freeing unused kernel memory: 1404K (ffffffff81d36000 - ffffffff81e95000) [ 0.982240] Write protecting the kernel read-only data: 12288k [ 0.982407] Freeing unused kernel memory: 108K (ffff8800017e5000 - ffff880001800000) [ 0.982487] Freeing unused kernel memory: 360K (ffff880001ba6000 - ffff880001c00000) [ 0.996585] systemd-udevd[149]: starting version 204 [ 1.006922] sdhci: module verification failed: signature and/or required key missing - tainting kernel [ 1.007098] sdhci: Secure Digital Host Controller Interface driver [ 1.007099] sdhci: Copyright(c) Pierre Ossman [ 1.018856] wmi: Mapper loaded [ 1.020314] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45 [ 1.021003] ahci 0000:00:1f.2: version 3.0 [ 1.021043] [drm] Initialized drm 1.1.0 20060810 [ 1.021178] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.027456] AVX2 version of gcm_enc/dec engaged. [ 1.027458] AES CTR mode by8 optimization enabled [ 1.034384] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 1.034389] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 1.034729] scsi host0: ahci [ 1.034939] scsi host1: ahci [ 1.035045] scsi host2: ahci [ 1.035195] scsi host3: ahci [ 1.035254] ata1: DUMMY [ 1.035256] ata2: DUMMY [ 1.035257] ata3: DUMMY [ 1.035260] ata4: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222280 irq 46 [ 1.035894] [drm] Memory usable by graphics device = 4096M [ 1.035898] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 1.035900] fb: switching to inteldrmfb from VESA VGA [ 1.035917] Console: switching to colour dummy device 80x25 [ 1.035999] [drm] Replacing VGA console driver [ 1.036747] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead [ 1.042416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.042418] [drm] Driver supports precise vblank timestamp query. [ 1.042516] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.059908] fbcon: inteldrmfb (fb0) is primary device [ 1.067445] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.068862] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.068975] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 1.262567] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.282632] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.354654] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.356653] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.356654] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.356655] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.357012] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.357078] ata4.00: configured for UDMA/133 [ 1.357209] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 1.357384] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.357422] sd 3:0:0:0: [sda] Write Protect is off [ 1.357424] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.357437] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.357462] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.357833] sda: sda1 sda2 < sda5 > [ 1.358293] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.390952] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 1.390954] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.390964] usb 1-1: Product: USB 2.0 Hub [ 1.391273] hub 1-1:1.0: USB hub found [ 1.391295] hub 1-1:1.0: 4 ports detected [ 1.415122] usb 3-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.415124] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.415354] hub 3-1:1.0: USB hub found [ 1.415427] hub 3-1:1.0: 8 ports detected [ 1.558786] usb 1-3: new full-speed USB device number 3 using xhci_hcd [ 1.638820] tsc: Refined TSC clocksource calibration: 2593.994 MHz [ 1.638822] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns [ 1.687428] usb 1-3: No LPM exit latency info found, disabling LPM. [ 1.688351] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 1.688353] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.774932] usb 1-1.1: new full-speed USB device number 4 using xhci_hcd [ 1.870973] mmc0: new SDHC card at address acd5 [ 1.871601] mmcblk0: mmc0:acd5 SD04G 3.69 GiB [ 1.876998] mmcblk0: p1 [ 1.881154] usb 1-1.1: New USB device found, idVendor=062a, idProduct=4101 [ 1.881155] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.881156] usb 1-1.1: Product: 2.4G Keyboard Mouse [ 1.881157] usb 1-1.1: Manufacturer: MOSART Semi. [ 1.881232] usb 1-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.882974] hidraw: raw HID events driver (C) Jiri Kosina [ 1.885967] usbcore: registered new interface driver usbhid [ 1.885967] usbhid: USB HID core driver [ 1.886486] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:062A:4101.0001/input/input8 [ 1.915589] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 1.939023] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1.1/input0 [ 1.939237] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:062A:4101.0002/input/input9 [ 1.942267] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 1.990963] usb 1-5: new high-speed USB device number 5 using xhci_hcd [ 1.995124] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-1.1/input1 [ 1.998183] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800, board id: 3038, fw id: 1832324 [ 2.031363] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.238989] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c [ 2.238991] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.238992] usb 1-5: Product: Integrated_Webcam_HD [ 2.238993] usb 1-5: Manufacturer: CN09GTFM7248755KBCKBA00 [ 2.246187] Console: switching to colour frame buffer device 240x67 [ 2.249880] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.249881] i915 0000:00:02.0: registered panic notifier [ 2.263167] usb 1-1.2: new low-speed USB device number 6 using xhci_hcd [ 2.374591] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2107 [ 2.374593] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.374595] usb 1-1.2: Product: Dell USB Entry Keyboard [ 2.374597] usb 1-1.2: Manufacturer: Dell [ 2.374716] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.378676] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2107.0003/input/input10 [ 2.431528] hid-generic 0003:413C:2107.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-1.2/input0 [ 2.639543] Switched to clocksource tsc [ 8.058855] random: nonblocking pool is initialized [ 12.928306] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 12.928309] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 12.928311] PM: Marking nosave pages: [mem 0xc56cb000-0xffffffff] [ 12.928760] PM: Basic memory bitmaps created [ 12.929199] PM: Basic memory bitmaps freed [ 12.933165] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 12.933169] EXT4-fs (dm-1): write access will be enabled during recovery [ 13.085344] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 13.085568] EXT4-fs (dm-1): 1 orphan inode deleted [ 13.085570] EXT4-fs (dm-1): recovery complete [ 13.094375] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 13.230237] init: ureadahead main process (353) terminated with status 5 [ 13.297229] Adding 8720380k swap on /dev/mapper/my_vg-swap_1. Priority:-1 extents:1 across:8720380k SSFS [ 13.300256] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 13.345651] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 14.370408] systemd-udevd[577]: starting version 204 [ 14.410865] lp: driver loaded but no devices found [ 14.417191] ppdev: user-space parallel port driver [ 14.454736] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.527117] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150410/nspredef-297) [ 14.527127] ACPI: Invalid package element [0]: got number, expecting [R] [ 14.527129] _ART package 0 is invalid, ignored [ 14.544259] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 14.549768] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.563757] Bluetooth: Core ver 2.20 [ 14.563773] NET: Registered protocol family 31 [ 14.563775] Bluetooth: HCI device and connection manager initialized [ 14.563778] Bluetooth: HCI socket layer initialized [ 14.563781] Bluetooth: L2CAP socket layer initialized [ 14.563788] Bluetooth: SCO socket layer initialized [ 14.575733] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3263: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.575737] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.575740] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.575742] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 14.575743] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 14.575746] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 14.575748] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 14.575750] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 14.579327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.579331] Bluetooth: BNEP filters: protocol multicast [ 14.579335] Bluetooth: BNEP socket layer initialized [ 14.586433] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 14.586537] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 14.586641] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 14.586748] Bluetooth: RFCOMM TTY layer initialized [ 14.586754] Bluetooth: RFCOMM socket layer initialized [ 14.586759] Bluetooth: RFCOMM ver 1.11 [ 14.596340] audit: type=1400 audit(1437130612.102:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=716 comm="apparmor_parser" [ 14.600030] audit: type=1400 audit(1437130612.106:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=722 comm="apparmor_parser" [ 14.600036] audit: type=1400 audit(1437130612.106:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=722 comm="apparmor_parser" [ 14.600570] audit: type=1400 audit(1437130612.106:5): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=722 comm="apparmor_parser" [ 14.607681] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 14.643098] init: cups main process (732) killed by HUP signal [ 14.643105] init: cups main process ended, respawning [ 14.669942] cfg80211: Calling CRDA to update world regulatory domain [ 14.677298] Intel(R) Wireless WiFi driver for Linux [ 14.677302] Copyright(c) 2003- 2015 Intel Corporation [ 14.678578] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 14.682486] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 14.709479] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 14.709890] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 14.710227] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 14.748339] intel_rapl: Found RAPL domain package [ 14.748343] intel_rapl: Found RAPL domain core [ 14.748345] intel_rapl: Found RAPL domain uncore [ 14.748347] intel_rapl: Found RAPL domain dram [ 14.765576] media: Linux media interface: v0.10 [ 14.770207] Linux video capture interface: v2.00 [ 14.775917] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 14.784039] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 14.805696] device-mapper: multipath: version 1.9.0 loaded [ 14.816414] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input15 [ 14.816489] usbcore: registered new interface driver uvcvideo [ 14.816491] USB Video Class driver (1.1.1) [ 14.824817] usbcore: registered new interface driver btusb [ 14.845696] Bluetooth: hci0: read Intel version: 370810011003110e04 [ 14.845700] Bluetooth: hci0: Intel device is already patched. patch num: 04 [ 14.906673] input: Dell WMI hotkeys as /devices/virtual/input/input16 [ 14.925183] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.926004] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 14.935456] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 14.936976] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 14.940131] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 14.940217] input: DLL0665:01 06CB:76AD UNKNOWN as /devices/pci0000:00/INT3433:00/i2c-9/i2c-DLL0665:01/0018:06CB:76AD.0004/input/input17 [ 14.940460] hid-multitouch 0018:06CB:76AD.0004: input,hidraw3: HID v1.00 Mouse [DLL0665:01 06CB:76AD] on [ 14.949734] audit: type=1400 audit(1437130612.454:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1019 comm="apparmor_parser" [ 14.949741] audit: type=1400 audit(1437130612.454:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1019 comm="apparmor_parser" [ 14.949744] audit: type=1400 audit(1437130612.454:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1019 comm="apparmor_parser" [ 14.950111] audit: type=1400 audit(1437130612.454:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1019 comm="apparmor_parser" [ 14.950116] audit: type=1400 audit(1437130612.454:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1019 comm="apparmor_parser" [ 14.950278] audit: type=1400 audit(1437130612.454:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1019 comm="apparmor_parser" [ 14.954300] cfg80211: World regulatory domain updated: [ 14.954304] cfg80211: DFS Master region: unset [ 14.954305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.954308] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.954310] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.954312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.954314] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.954316] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 15.045614] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 15.072675] init: failsafe main process (1047) killed by TERM signal [ 15.667237] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 15.667478] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 15.730146] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 15.730345] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 15.736250] init: vasconf1 main process (1719) terminated with status 1
